Vanguard

Over the past 6 years, I have had the privilege to design 12 knives for the VANGUARD Series, offered by Purveyor Les Robertson.

Each of these knives was part of a numbered, limited edition series. These pictures are posted here to archive my work, and to show you the extent of my capabilities in tactical fixed blades. Folders and D/A autos. In this series, the only knife currently available is the Trailblazer. Every other knife is sold out, but, you can still enjoy the pictures!

Hover over the picture for a larger view.

THESE KNIVES ARE NO LONGER AVAILABLE-visit www.robertsoncustomcutlery.com to check availablilty on the aftermarket.

 

DRT (Dead Right There)

drt_lg

Image 1 of 3

The knife that won “Best Folder” at the 2010 BLADE Show
Blade Steel: CPMS30V, Rc60. Tumble finish, non-reflective
Blade Length: 4″
Overall Length: 8.75″
Frame: 3/16″ thick Titanium. Ceramic bead blasted.
Clip: Orange Peel Titanium, tip-up carry.
Inlays:4 inlays, textured Carbon Fiber.

  • Roller Thrust Bearings.
  • Inlays and clip are specially designed to cover the locking bar slot and to keep the user’s fingers off the locking bar during opening. Lock-side inlay acts as an over-travel stop for the lock.
  • Interior pockets are machined in the frames to remove 30% (1 oz) of the weight from the frames.
  • 25 numbered knives were produced. SOLD OUT
 

HAVOC

lg_havoc

Image 1 of 2

Wreak HAVOC on all your cutting tasks…

The HAVOC offers all the high-end features of the DEVASTATOR in a scaled down package that is perfect for everyday carry. Incorporating thick titanium sideplates, and my awesome roller bearing system, the HAVOC is as fast as an auto to deploy, and totally reliable.

The unique faceted blade, the first of it’s kind in the world, gives the HAVOC a unique personality in a sea of hum-drum competition. This knife has already been featured in several major knife publications, including the April, 2007 issue of Blade Magazine.

Blade Steel: CPMS30V, Rc59
Blade Length: 3.5″
Blade Thickness: .130
Overall Length: 7.9″
Handle Length:4.4″
Blade Finish: Black Epoxy Powdercoat
Handle Material: .125 thick Powdercoated Titanium frames w/CNC textured Green Canvas Micarta overlays

 

 

Dress Havoc

lg_dress_havoc

Image 1 of 1

Look Sharp, Be Sharp!

The Dress Havoc provides the same features as the HAVOC, bit with an upscale look and feel. Blade is fully hollow ground, with a crisp satin finish.

Blade Steel: CPMS30V, Rc59
Blade Length: 3.5″
Blade Thickness: .130
Overall Length: 7.9″
Handle Length: 4.4″
Blade Finish: Satin
Handle Material: .125 thick Titanium frames w/CNC textured C/F overlays

 

Rampage BTF

lg_btf

Image 1 of 1

The Rampage BTF won the award for Best Tactical Folder at the 2008 Blade Show in Atlanta. A knife enthusiasts competition put on by Blade Magazine.

Blade Steel: CPMS30V, Rc59
Blade Length: 4″
Blade Thickness: . 200″
Overall Length: 9″
Handle Length: 5″
Blade Finish: Hand Rubbed Satin Finish
Handle Material:Titanium Frames and bolsters, CNC textured and epoxy powdercoated. CNC textured and contoured Green Canvas Micarta scales

 

Avenger (Recurve)

avenger_recurve_lg

Image 1 of 2

If you’re looking for a BIG, STRONG Framelock this knife is for you!

The Avenger design incorporates all the features my customers expect in a heavy duty tactical folder:

-2 deep finger grooves provide positive indexing in both forward and reverse grips.
-Deep traction grooves on blade spine anchor the thumb, but don’t hang up on your pocket during deployment.
-CNC Textured scales for maximum grip-ability.
-Ambidextrous textured Titanium thumb stud for slip-free blade opening.
-The .090 thick Titanium frame is rigidized by 4 precision Ti standoffs and a massive 3/16 DIA. Hardened Stainless stop pin.
-Deep carry Titanium Pocket clip available in plain or bead blast finish.
-Blade to handle length ratio: 85%

Blade Steel: CPMS30V, Rc59
Blade Length: 4 1/4″
Overall Length: 9 1/2″
Handle Length: 5 1/4″
Blade Steel: CPM S30V Stainless Satin Finish
Blade Thickness: .175
Handle Material: Bead Blast Titanium w/ CNC textured G-10 overlays
Weight: 5.4 ounces / 152 grams

The Avenger is available with the following options:
-Recurve or Spear Point blade with false top edge
-Plain or bead blasted clip
-Green/Black G-10, Silver G10, Blue Twill G10, Carbon Fiber or Tan Canvas Micarta Scales

 

Avenger (Spearpoint)

avenger_spear_lg

Image 1 of 2

If you’re looking for a BIG, STRONG Framelock this knife is for you!

The Avenger design incorporates all the features my customers expect in a heavy duty tactical folder:

-2 deep finger grooves provide positive indexing in both forward and reverse grips.
-Deep traction grooves on blade spine anchor the thumb, but don’t hang up on your pocket during deployment.
-CNC Textured scales for maximum grip-ability.
-Ambidextrous textured Titanium thumb stud for slip-free blade opening.
-The .090 thick Titanium frame is rigidized by 4 precision Ti standoffs and a massive 3/16 DIA. Hardened Stainless stop pin.
-Deep carry Titanium Pocket clip available in plain or bead blast finish.
-Blade to handle length ratio: 81%

Blade Steel: CPMS30V, Rc59
Blade Length: 4 1/4″
Overall Length: 9 1/2″
Handle Length: 5 1/4″
Blade Steel: CPM S30V Stainless Satin Finish
Blade Thickness: .175
Handle Material: Bead Blast Titanium w/ CNC textured G-10 overlays
Weight: 5.4 ounces / 152 grams

The Avenger is available with the following options:
-Recurve or Spear Point blade with false top edge
-Plain or bead blasted clip
-Green/Black G-10, Silver G10, Blue Twill G10, Carbon Fiber or Tan Canvas Micarta Scales

 

Trooper

trooper

Image 1 of 2

The Trooper is an Avenger with a striated blade and larger, thicker scales for those who prefer a more traditional handle.

The Trooper design incorporates all the features my customers expect in a heavy duty tactical folder:

  • 2 deep finger grooves provide positive indexing in both forward and reverse grips.
  • Deep traction grooves on blade spine anchor the thumb, but don’t hang up on your pocket during deployment.
  • CNC Textured scales for maximum grip-ability.
  • Ambidextrous textured Titanium thumb stud for slip-free blade opening.
  • The .090 thick Titanium frame is rigidized by 4 precision Ti standoffs and a massive 3/16 DIA. Hardened Stainless stop pin.
  • Deep carry Titanium Pocket clip available in plain or bead blast finish.
  • Blade to handle length ratio: 85%

Blade Steel: CPMS30V, Rc59
Blade Length: 4 1/4″
Overall Length: 9 1/2″
Handle Length: 5 1/4″
Blade Steel: CPM S30V Stainless Satin Finish with CNC Striations
Blade Thickness: .175
Handle Material: Bead Blast Titanium w/ CNC textured G-10 overlays
Weight: 5.4 ounces / 152 grams

The Trooper is available with the following options:

  • A non-striated blade
  • Plain or bead blasted clip
  • Green/Black G-10 Scales
 

Contender

contender

Image 1 of 2

A midsize tactical folder for everyday carry-Shown beneath the Avenger for size comparison.

The Contender is a “big” knife in a smaller package:
-2 deep finger grooves provide positive indexing in both forward and reverse grips.
-Deep traction grooves on blade spine anchor the thumb, but don’t hang up on your pocket during deployment.
-CNC Textured scales for maximum grip-ability.
-Ambidextrous Stainless thumb studs with rubber inserts for slip-free blade opening.
-The .070 thick Titanium frame is rigidized by 3 precision Ti standoffs and a 1/8 DIA. Hardened Stainless stop pin.
-Deep carry Titanium Pocket clip available in plain or bead blast finish.
-Blade to handle length ratio: 81%

The Contender is available with the following options:
-Plain or bead blasted clip
-Green/Black G-10, Silver G10, Blue Twill G10, or Carbon Fiber Scales

Blade Steel: CPMS30V, Rc59
Blade Length: 3 1/2 ”
Overall Length: 7 1/2″
Handle Length: 4 1/8 ”
Blade Steel: CPM S30V Stainless Satin Finish with CNC Striations
Blade Thickness: .130
Handle Material: Bead Blast Titanium w/ CNC textured overlays
Weight: 3.1 ounces / 86 grams

 

4″ Rampage

4_rampage1

Image 1 of 4

The name says it all.Due to the overwhelming popularity of the RAMPAGE, I have decided to offer the same features in a sub-4″ blade that is legal to carry in most places. I have maintained the same full sized, ergonomic handle profile, but I have enhanced the grip with the addition of CNC fluted scales. The 4″ RAMPAGE also features rear thumb notches that enhance the reverse grip.

Blade Steel: CPMS30V, Rc59
Blade Length: 3.9″
Blade Thickness: .180
Overall Length: 8.8″
Handle Length: 4.9″
Weight (Knife only): TBD
Weight (Including sheath): TBD